Cotton canopy reflectance under variable solar zenith angles: Implications of use in evapotranspiration models     

Christopher M. U. Neale  Maria P. Gonzalez-Dugo  Angelica Serrano-Perez  Isidro Campos  Luciano Mateos 《水文研究》2021,35(6):e14162

Evapotranspiration (ET) is an important parameter in hydrologic processes and modelling. In agricultural watersheds with competing uses of fresh water including irrigated agriculture, estimating crop evapotranspiration (ET_c) accurately is critical for improving irrigation system and basin water management. The use of remote sensing-based basal crop coefficients is becoming a common method for estimating crop evapotranspiration for multiple crops over large areas. The Normalized Difference Vegetation Index (NDVI) and the Soil Adjusted Vegetation Index (SAVI), based on reflectance in the red and near-infrared bands, are commonly used for this purpose. In this paper, we examine the effects of row crop orientation and soil background darkening due to shading and soil surface wetness on these two vegetation indices through modelling, coupled with a field experiment where canopy reflectance of a cotton crop at different solar zenith angles, was measured with a portable radiometer. The results show that the NDVI is significantly more affected than the SAVI by background shading and soil surface wetness, especially in north–south oriented rows at higher latitudes and could lead to a potential overestimation of crop evapotranspiration and irrigation water demand if used for basal crop coefficient estimation. Relationships between the analysed vegetation indices and canopy biophysical parameters such as crop height, fraction of cover and leaf area index also were developed for both indices.  相似文献   

捷联式航空重力扰动矢量解算及误差补偿     

郭栋  孙中苗  吴富梅  张琪 《大地测量与地球动力学》2018,38(12):1295-1301

介绍捷联式航空重力矢量测量的基本原理，利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿，评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理，以验证和评估航空重力矢量仪的性能。结果表明，在半波长分辨率为7.5 km时，6条重复测线的重力扰动水平分量经波数相关滤波处理后，东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal；对比力的垂向分量线性校正后，将解算的重力扰动垂向分量再用WCF方法处理，其平均内符合精度从1.27 mGal提高到0.59 mGal。  相似文献   

Development of the cyclic p–y curve for a single pile in sandy soil     

Sung-Ha Baek  Joonyoung Kim  Seung-Hwan Lee 《Marine Georesources & Geotechnology》2018,36(3):351-359

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.  相似文献   

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood          下载免费PDF全文

Shanghong Zhang  Zhu Jing  Wenda Li  Yujun Yi  Yong Zhao 《水文研究》2018,32(11):1625-1634

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.  相似文献   

A multiscaling‐based intensity–duration–frequency model for extreme precipitation          下载免费PDF全文

Hans Van de Vyver 《水文研究》2018,32(11):1635-1647

Rainfall intensity–duration–frequency (IDF) curves are a standard tool in urban water resources engineering and management. They express how return levels of extreme rainfall intensity vary with duration. The simple scaling property of extreme rainfall intensity, with respect to duration, determines the form of IDF relationships. It is supposed that the annual maximum intensity follows the generalized extreme value (GEV) distribution. As well known, for simple scaling processes, the location parameter and scale parameter of the GEV distribution obey a power law with the same exponent. Although, the simple scaling hypothesis is commonly used as a suitable working assumption, the multiscaling approach provides a more general framework. We present a new IDF relationship that has been formulated on the basis of the multiscaling property. It turns out that the GEV parameters (location and scale) have a different scaling exponent. Next, we apply a Bayesian framework to estimate the multiscaling GEV model and to choose the most appropriate model. It is shown that the model performance increases when using the multiscaling approach. The new model for IDF curves reproduces the data very well and has a reasonable degree of complexity without overfitting on the data.  相似文献   

Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape          下载免费PDF全文

Aimé Kayembe  Carl P. J. Mitchell 《水文研究》2018,32(18):2845-2855

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.  相似文献   

GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

Spatial patterns and driving mechanisms of mid‐Holocene hydroclimate in western North America          下载免费PDF全文

Nicholas Wayne Hermann  Jessica Leigh Oster  Daniel Enrique Ibarra 《第四纪科学杂志》2018,33(4):421-434

  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

弧形海岸裂流的数值模拟研究   总被引：3，自引：0，他引：3  

汪鸿  朱首贤  李训强  张文静  聂屿 《海洋学报(英文版)》2018,37(3):21-30

弧形海岸波浪产生的裂流严重危害人类活动，但是目前对其特征缺乏充分认识。本文对Haller物理模型实验和三亚大东海的数值模拟表明FUNWAVE模式具有较好的裂流模拟能力。基于该模式进行了多种弧形海岸条件的裂流数值模拟，给出裂流的一些特征：（1）海岸弯曲度增大，裂流增强；（2）海岸坡度对裂流有比较大的影响，太陡或太平缓的海岸不利于形成裂流；（3）海岸尺寸减小，裂流减弱；（4）波高和波周期增大，裂流增强，但是对于某些海岸而言，0.4m波高可能就存在危害比较大的裂流。  相似文献